MG300PK Magnetic drive gear pump is a new gear pump, which uses the new gear and the housing made of special engineering plastics. And the gear pump highly corrosive liquid, can work in the absence of lubricating fluid applications. Using magnetic force structural design coupled transmission to solve the problem of leakage of the gear shaft end, it is called a leak-free gear pump is mainly used for curing agent casting equipment (acid type) transport, as well as laboratory or alkali chemical production trace liquid transportation field.

Model specification

Model	MG	3	00	P	K
Position	1	2	3	4	5
1	Pump Type	MG = Magnetic drive gear pumps
2	Pump Series	3 = 3 Series
3	Gear height	12 = 12mm 17 = 17mm
4	Shell material	P = PPS plastic
5	Gear Material	K = PEEK plastic

Technical parameters

Specifications Model	Displacement (ml / rev)	Maximum Pressure (bar)	System pressure (bar)	Rev. range (rpm)	Medium viscosity (cps)
MG312PK	1	2	-0.8 ~ 3	500 to 3000	0.2 to 1500
MG317PK	Fifteen

Note: 1, the transmission medium temperature: -10 ℃ ~ 100 ℃ (except frozen); Ambient temperature: -10 ~ 50 ℃.

2, gear pump static sealing materials for the fluorine rubber or PTFE, shaft material is Hastelloy Alloy, rotor cover material is PTFE coating inside Stainless steel.

3, the liquid containing the particle diameter of ≤20 microns, granule hardness less than the hardness of PEEK.

4, or may be a high pressure (3bar) used in a closed system under vacuum (-0.8bar).

 

Outline dimension chart:

Order

【Pre】 【Next】 【Back】