MG300XK / AC220 (380) FB Magnetic drive gear pumps, the use of AC asynchronous Explosion-Proof Motor-driven, outer shaft and rare earth permanent magnet Motor connection drive gear pump. The advantage is Rev. constant torque, long-term stability, connected to the inverter can realize adjust the pump flow is widely used to measure chemical, oil, fuel and other flammable liquids transportation. MG300 full range of gear pump head can use AC asynchronous Explosion-Proof Motor.
Model specification
Model |
MG |
3 |
00 |
X |
K |
/ |
AC380 |
FB |
- |
2 |
/ |
180 |
Position |
MG300 full range of gear pump head can be |
1 |
2 |
3 |
4 |
|||||||
1 |
Motor voltage |
AC220 = AC 220V three-phase AC380 = AC 380V |
||||||||||
2 |
Motor Types |
FB = Explosion-Proof Motor |
||||||||||
3 |
Motor Rev. |
4 = 2 = 2 pole 4 pole |
||||||||||
4 |
Motor Power |
180 = 180W |
suitable areas
• Fine Chemicals • fuel delivery • Metering systems • Auto Repair
Technical parameters
Model |
preset pressure |
Flow was scope |
Maximum Power |
System pressure |
Speed range |
MG312XK / AC220 (380) FB |
5bar |
500 ~ 3000ml / min |
180W |
-0.8 ~ 20bar |
2-pole or 4-pole |
MG317XK / AC220 (380) FB |
800 ~ 4500ml / min |
Note: 1, suitable ambient temperature: -10 ℃ ~ 50 ℃; Humidity: ≤75%.
2, Motor Voltage: AC220V or AC380V.
3, Speed mode: with inverter.
4, explosion-proof mark: ExdⅡBT4.
Outline dimension chart:
Flow graph:
All of the above parameters are tested by water as medium.